![]() Can you either share the original, or point out which one is? With that, I can give you some steps to achieving the best possible results. ![]() Of all the images that you showed, I didn't find the original - at least not by their titles. Can anyone please tell me what I'm doing wrong? Your help will be much appreciated! I feel like this should be pretty straightforward and I can't figure out why I'm having so much trouble. I tried many, many other things as well but what I've described here is what got me closest to what I wanted. Tracing the black image in Inkscape using Brightness Cutoff then changing it to white in Inkscape by selecting from the swatch, but this again resulted in lines that were thicker than the original black version (see toothickswatch.png). Tracing the black image in Inkscape using Edge Detection (see blackaftertrace.png and blackaftertrace.svg) then changing it to white in Inkscape using the bucket tool (only filled small areas) and by selecting the image and selecting from the swatch (which at most reduced the thickness of the lines as seen in reducedlines.png). For the thick lines see toothick.png it's particularly noticeable between the pupil and lower eyelid on the right eye. In particular, the top of the left eye has a big grey line that I think is the result of a fuzzy line from using the brush tool on the black version (see top of left eye in blackbeforetrace.png). For the grey splotches see, see greylines.png (you might have to zoom in to see). However, the main little glitches I had were all these grey lines/splotches where it was supposed to be white, or all the lines became way thicker than the original black image. I tried so many different settings that I can't remember which ones had which problems. Then I traced the new white image in Inkscape. I changed the untraced black image to white in GIMP (using a brush size larger than my image and the Lighten Only mode). So I've tried several different ways to change this logo to white. Also, I'm very new to Inkscape and GIMP and all that so I'm sure this is an easy fix but I can't for the life of me figure it out. I've tried to find the answer in the manual, on this forum, and on the web, but I've had no luck. Similar results on both but seems like sometimes the macbook actually does better with this procedure.I'm trying to change a solid black logo I made to solid white, but everything I've tried has yielded a different problem. Is there a reason that the “intersect faces” and/or “weld lines” overwhelms everything?įYI-I have a 2015 macbook pro quadcore intel i7 and a 2020 M1 mac mini. Question: is there a better way to do what I am trying to do? When it does work I can then delete the negative space in the image and push/pull the image into an dimensional material and it is great! Obviously more so when the images are more detailed. Then I “heal” the surface by drawing a line through it, then I select the surface and all the image lines and “intersect faces > with selection” and “weld edges”Īt this point the pinwheel starts spinning and often throws skp into non-response and I sometimes have to force quit or wait a very long time. ![]() I have a regular need to take my hand drawings and turn them into a solid surface on Skp so that I can model for clients and study shadows, etc.Ĭurrently I draw by hand, trace drawing on GIMP, copy/paste to INKSCAPE (trace bitmap to create a vector file), export as a PNG, then convert the PNG to a DXF on CONVERTIO.Īt that point I usually click and drag or import the DXF file to Skp where it shows up as a component (I think). I would say I am competent but not proficient. I have been using sketch up pro for a couple years now. I end up doing a lot of hand drawings and then cutting the images out of steel. I am a public artist and steel fabricator.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |